Bucker L
Bucker L is the first vertical and fully portable bucking system on the market.
With a resistant stainless-steel body, powerful engine, and bucking capacity of as much as 60 kg per hour, Bucker L® rapidly speeds up the pre-trimming process. Die holes with four different diameters allow to perfectly buck cannabis flowers of different sizes - from massive outdoor stems to tiny side stems.
Two rotating rubber cylinders inside powered by a strong engine with a powerful gearbox provide enough performance at different speeds to deal with stems of almost any thickness. These two cylinders take the stem through the device with the option to adjust their rotation speed for the optimum processing flow. While the stems are dropped at the end of the process, the flowers are collected into a bin or placed directly on the conveyor IN®.
Handling Bucker L® is easy and safe for anyone.
No need for special skills or toolsets. Most handling procedures are manual-driven and easily understandable to anyone.Have a look at how to handle Bucker ® in the following video:
Additional parameters
| Category: | Trimmers and Conveyors |
|---|---|
| Warranty: | 5 years |
| Device size (h,w,d): | 136x91x72 cm |
| Device weight: | 80 kg |
| Shipping size: | 105x120x80 cm |
| Shipping weight: | 90 kg |
| Wet bucking: | 60 kg/h |
| Input voltage: | 230 V |
| Input frequency: | 50 Hz |
| Motor current: | 1,4 A |
| Motor output: | 0.25 kW |
| Motor IP rating: | 55 |
| Motor rotation: | 1365 min-1 |
| Gear ratio: | 1:10 |
| Nr. of cylinders: | 2 |
| Nr. of inlets: | 4 |
| Cylinder diameter: | 160 mm |
| Rotation range: | 50-500 |
Be the first who will post an article to this item!