Malapa IN03 air ionizer

Improved and silent air ionizer IN03. The IN03 negative ion generator does not produce ozone. Tested by the National Institute of Public Health.

Availability OUT OF STOCK
Code: 2287
€239,28
Malapa IN03 air ionizer

Enjoy freshly purified air enriched with negative ions in the rooms without having to use large and noisy devices for this purpose.

The IN03 air ionizer has been successfully tested by the National Institute of Public Health. The air ionizer is a device for enriching the air with negative ions. The device is a high-performance negative ion generator and can cover larger rooms up to 150m3. No harmful ozone was detected in the IN03 ionizer. For a long stay in the room we recommend staying at least 2.5m away from the device. Negative ions are fired into the space by a special carbon fiber emitter. The produced negative ions (anions) are colorless and odorless (be careful not to confuse with ozone).

Wherever electrical and electronic devices are used, positive ions (cations) are generated by electrostatic charges, which cause increased nervousness and fatigue. This air ionizer enriches the air with negative (anions). These negative charges compensate for this positive charge and thus improve the breathability of the air. The device neutralizes electrostatic charges and increases the concentration of negative ions.

The ionizer is not equipped with any fan or filters that need to be replaced (no extra expense). You can attach the device to the wall by means of hanging brackets (supplied). Long-term and flawless operation even under extreme conditions, over design.

Use of ionizer:

neutralization of odors and enrichment of air with negative ions in the premises of restaurants, toilets, kitchens, hospitals, home, food, waiting rooms, dressing rooms, department stores, low-energy buildings, relaxation rooms, salt caves, sports halls, gyms, antistatic workplaces. At home, in the food, industry, or science ...

measured concentrations of light negative ions:

at a distance of 50 cm from the emitter, the average concentration of negative ions is 3.0 × 105 per cm2

at a distance of 100 cm from the emitter, the average concentration of negative ions is 8.0 × 104 per cm2

at a distance of 150 cm from the emitter, the average concentration of negative ions is 2.8 × 104 per cm2

at a distance of 200 cm from the emitter, the average concentration of negative ions is 1.2 × 104 per cm2

at a distance of 250 cm from the emitter, the average concentration of negative ions is 4.8 × 103 per cm2

at a distance of 300 cm from the emitter, the average concentration of negative ions is 1.3 × 103 per cm2

at a distance of 350 cm from the emitter, the average concentration of negative ions is 7.5 × 102 per cm2

at a distance of 400 cm from the emitter, the average concentration of negative ions is 5.4 × 102 per cm2

Installation of ionizer:

The ionizer produces high voltage, albeit with minimal current. Install the device indoors in a safe and dry place with good air circulation. The device must be placed at a height that is within reach of people and animals. Optimal distance from the device for long-term stay of people and animals from 2.5m. Do not come into contact with water or other liquids (do not use in the bathroom).

Ionizer maintenance:

Always follow safety precautions during maintenance. Turn off and unplug the unit before handling the unit. The emitter (brush) may become dirty with time, you can clean it by vacuuming or scraping (or by replacing it with a new one). Do not use this product and its accessories in conflict with this manual! The ionizer requires no maintenance other than cleaning the brush. Do not use any scrubbing agents or chemical solvents (paint and varnish thinners) as these may damage the surface. The recommended cleaning is mechanical.

Technical data of IN03 ionizer: power supply - 230V AC 50Hz

 

power consumption - up to 2W
concentration of negative ions (anions) - avg. from 3.0 × 105 / 1cm2 (50cm) to 5.4 × 102 / 1cm2 (400cm)
ozone concentration was not detected
room size- up to 150m3
main switch with LED indication (signals connection to the mains)
power cord with plug - 3 meters
operating temperature -20 ° to 70 ° C operating humidity- 10% to 70% RH (non-condensing)
storage temperature - 0 ° to 45 ° C emitter material - carbon fiber
emitter size (brush) - 12mm, total 31mm
box size- length 170, width 120, height 85mm
surface / wall mounting (brackets)
total weight- 900gr
ABS
IPXX protection
RoHS

Be the first who will post an article to this item!

Do not fill out this field:

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

Do not fill out this field: