Lumatek Zeus 600W Pro 2.9 LED producing a PPF of 1770 µmol/s and a very high efficacy of up to 2.9 µmol/J.
In 2020 The Lumatek Zeus 600W Pro stunned the grow lighting industry with its power, practically and beauty.
Now, in 2021, Lumatek brings you even closer to the perfect LED fixture, the Zeus 600W Pro 2.9. Get ready to grow, The brightest just got brighter.
The higher specification Lumatek Zeus Pro 2.9 is a linear multi-light bar fixture producing very high levels of PPF of 1770 µmol/s and a very high efficacy of up to 2.9 µmol/J.
The fixture efficacy will vary depending on the Input Voltage used.
Pioneers of the innovative, modular, magnetic LED light bar design.
With the advances in technology and fixture performance, high quality LED horticultural lighting is now a credible option offering significant return on investment to cultivators. Lumatek full spectrum horticultural LED solutions balance light quality (spectra) with light quantity (intensity and duration) ensuring an even light distribution and uniform spread.
The array of the Lumatek Zeus 600W Pro 2.9 creates a uniform spread of light at short distance to the crop enabling single source grow lighting for multi-layer cultivation systems, single benches in low rooms and grow tents. This fixture will cover perfectly 1.4×1.4m for Flowering and 1.5×1.5m for Veg.
Lumatek brings you even closer to the perfect LED fixture, the brightest just got brighter.
The new 2.9 line of Lumatek Zeus is built using high quality Lumatek drivers and latest generation higher efficiency top bin LEDs from Lumileds and Osram, generating a full-spectrum light source ideal for veg and flowering cycles.
Another new feature of this line is the Clear Glue protection cover technology on the LED bars; resulting in higher light transmittance of 99% without light loss, extended lifetime of diodes, extra corrosion resistance and high waterproof of IP65. For basic maintenance, simply clean the bars with wet cotton.
For different cultivars, propagation and vegetative growth periods the Zeus 600W Pro 2.9 may be dimmed without losing efficiency. The high efficiency and low powered LED configuration with 6 LED bars reduces the temperature of the LEDs increasing the output and improving light maintenance.
The Zeus fixture can also be externally controlled with a Lumatek digital lighting controller (Digital Panel Plus 2.0) featuring light timing, automated dimming (1% increments), temperature safety control, Sunrise & Sunset Mode for up to 100 fixtures per controller.
Universal Control Systems Compatibility
Lumatek LED Fixtures can be fully controlled with either the Lumatek Digital Panel Plus 2.0 or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.
Do you have a Zeus 600W Pro and are thinking if you can upgrade it for the Zeus 600W Pro 2.9 without buying a full new fixture?
The answer is YES, you can do it and you simply have to buy the 100W Pro 2.9 Replacement LED Bars. Ideally, we recommend to upgrade all the six bars, in which you would remove all the six 100W Pro Bars and replace them for six Lumatek 100W Pro 2.9 LED Replacement Bar, Product Code: LUMM0029. In case you don’t have the possibility to replace and purchase all the six bars, the minimum we recommend per Zeus 600W Pro is 3 units, otherwise you may face input current disparities.
|Lumatek LED lightsLightbarsFlower & GrowDisplay additional categoriesFlower & Grow Energy savingFlower & Grow Low priceFlower & Grow High quality lightsFlower & Grow Made in EuropeFlower & Grow Made in USA
|? LED light type:
|Led Grow Bars
|Type of light spectrum:
|Up to 700 watt
|Up to 2.9 μmol / J
|up to 2.9 µmol/J
|+60 000 hrs
|Higher Spec Osram and Lumileds Diodes
|OFF-25%-50%-75%-100% with 0-10V Light Dimmer (Included)
|With Lumatek Digital Panel Plus 2.0
|Full Spectrum F
|BTU (With Driver Attached):
|2201 BTUs/h (Max)
|BTU (With Driver Remote):
|2047 BTUs/h (Max)